Hardness GL
Specifications | ||||||||||||||||||||||||||||
Thickness |
0.14-1.0 mm |
|||||||||||||||||||||||||||
Width |
600-1300 mm |
|||||||||||||||||||||||||||
Zinc Coating |
40-120g/m2 |
|||||||||||||||||||||||||||
Single weight |
3-10 tons |
|||||||||||||||||||||||||||
Coil ID |
508/610 mm |
|||||||||||||||||||||||||||
Thickness Tolerance |
±0.02mm |
|||||||||||||||||||||||||||
Width Tolerance |
±0.2mm |
|||||||||||||||||||||||||||
Certificate |
ISO9001:2008, ISO14001:2004, OHSAS18001:1999, SGS, BV |
|||||||||||||||||||||||||||
Steel Grade |
SGCC, DX51D, DX52D, DX53D,ASTM, DIN, GB, JIS |
|||||||||||||||||||||||||||
MOQ |
25 T |
|||||||||||||||||||||||||||
Payment terms |
T/T or L/C |
|||||||||||||||||||||||||||
Delivery time |
Within 30 working days after receiving L/C or 30% deposit of T/T |
|||||||||||||||||||||||||||
Mechanical Properties of GL | ||||||||||||||||||||||||||||
Grade |
Tensile test |
Application Yield strength MPa |
||||||||||||||||||||||||||
Yield strength MPa |
Tensile strength MPa |
HRB |
||||||||||||||||||||||||||
Soft |
_ |
_ |
<55 |
Glazed tile, for drawing |
||||||||||||||||||||||||
Normal |
_ |
270~500 |
55~75 |
Normal use |
||||||||||||||||||||||||
Full Hard |
>500 |
550~600 |
>80 |
Thin thickness wave sheet |
||||||||||||||||||||||||
Spangle | ||||||||||||||||||||||||||||
Production Lines | ||||||||||||||||||||||||||||
Project |
GL production line 1 |
GL production line 2 |
||||||||||||||||||||||||||
Max Speed |
150-170 meters per minute |
180-200 meters per minute |
||||||||||||||||||||||||||
Capacity |
0.2 million tons(planned) |
0.25 million tons(planned) |
||||||||||||||||||||||||||
Year of operation |
2010 |
2011 |
||||||||||||||||||||||||||
Composition | ||||||||||||||||||||||||||||
Zn+Al |
C |
Si |
Mn |
P |
S |
N2 |
||||||||||||||||||||||
98 |
0.100 |
0.200 |